If you are still struggling with how to assign needles without using an anchor on 9 of them, how to assign a stop for appliques, how to quilt in the hoop and pull up your bobbin thread and how to assign that next color after color #10, then this technique session of the Multi-Needle Mastery series is for you! We will be sewing out all the steps of the cupcake. There is no final completed project. You can choose how you want to use the final sample. Class includes a kit to make one cupcake.
This should not be your first multi-needle class. You will need to know how to thread your machine, how to access the machine settings screen, how to hoop fabric and stabilizer and how to use your hoop feed. This class will not be covering the operation of the machine other than the actual topics.
I, (Michelle) created the design in PE Design 11 software so that you get that experiece of assigning not only needle colors but also adding a stop. I will be providing the design for you for use in class. I can also provide the cut files upon request if you have a Scan N Cut. This class has a kit that contains the base fabric, the applique pieces and the batting, topper and stabilizer. I used an 8X8 hoop. But you can use your 8X14 if you don’t have an 8X8.
In preparation for class please remove all the anchors and set your machine into manual mode. There will be a pre-class video in the FB group if you have forgotten how to do this.
You can Join the FB group here: https://www.facebook.com/groups/693927186059484
Please read and refer to your supply list well before the class and have all your supplies ready.